- SKU:
- 203-212
- Weight:
- 10.93 LBS
- Maximum Purchase:
- 5 units
Use EC3 Mold Solution Concentrate to target musty smells in non-washable textiles and furnishings. Product can also be applied to hard surfaces and areas where you suspect mold growth or feel yourself reacting. When used regularly, indoor mold counts can be significantly reduced. Directions: Mist diluted solution on soft surfaces like drapes, furniture or carpets and allow to air dry. Spray or wipe on hard surfaces, such as counter tops and floors, and allow to air dry or wipe off. This product is safe for all materials, surfaces and fabrics. Items and areas can be treated as often as needed. This product is safe for children and pets, does not off-gas, contains no harmful chemicals and is not toxic. Product can also be used in the EC3 fogger to tackle mold and toxins in larger areas. EC3 can also be used for car heating and air conditioning systems and on vehicle upholstery to address particulates inside of your vehicle. For Fogger: Fill fogger drum with EC3 Mold Solution Concentrate diluted per bottle instructions. Use the calibration dial to select the spray volume needed. Enter the room or space where the fogger will be used. Plug the fogger into an outlet. (We suggest using an extension cord to have more ability to move around a room or an object for best coverage.) Turn the fogger on and disperse the mist in a steady up/down motion, so that it fully fills and covers a room, or so that it is evenly applied all over a surface or object. Hold the fogger steady with the handle to ensure a steady flow of EC3 through the machine. Turn off when finished. Drain and clean fogger after use. For Air Testing: Enter room or area that you wish to test. Remove test plate from clear plastic sleeve. Take lid off test plate and place open plate on a flat surface away from walls and windows. Place lid open side down next to the test plate. Go about your activities as normal. After 1 hour, place lid back on top of test plate. Seal plate closed with tape. Wrap sealed plate in aluminum foil. Label wrapped plate with name of room or space tested and date. Place wrapped and labelled plate in a drawer or cabinet. When 5 days have elapsed since the date of testing, remove the aluminum foil to reveal results. DO NOT unseal or open test plate. Use the KEY included with the test kit to determine your results.
